The best way to Cut Ceramic Tile with No Tile Cutter

The best way to Cut Ceramic Tile with No Tile Cutter

Tile cutters are efficient to make straight cuts, but that’s all they’re great for. That won’t do you any good in the event that you if you want to to tile around your commode, an oval bath tub or shower fixtures. Tile cutters make in the event that you need to eliminate one corner it simple to reduce too much of the tile. There are techniques for reducing tiles which don’t require a tile cutter. They’re going to have a little longer as well as a lot more elbow-grease to use, but are significantly more cost-effective.

Cutting Straight Lines and Holes

The location where the tile will soon be installed. Subtract 1/4 inch to permit a spacer to find out the precise size to reduce the tile. Mark a line on the other side of the tile at that length. Hold a straightedge along with the tile arranged using the marks you made. Score across the line with all the tool after which bend the tile. The tile will split the line over.

Use the tile cut and saw to reduce the tile and leave-behind a edge: Line up the blade on the saw using the not in the line. The outside of the line is the area of the tile you’re cutting away. A tile observed also is best suited for “L” shaped cuts. First mark the tile, utilizing your measurements, and after that cut across the exterior of the lines.

Attach a tile hole- bit to your own drill. Secure the tile into a steady worksurface, utilizing clamps. Before you’ve got completely cut via the tile drill a hole from your very best of the tile. Smooth over the cut edges of the tile using a damp, double-sided sanding stone. As needed, around the the bottom and leading edges of non-glazed tiles on the cut-side to generate a smoother look.

Cutting Shallow Curves

Create a template for cuts, using an item of paper; a DD 1/2 on along side it of the template facing the curved . that is area Along the fringe of of the paper, 1/2inch long, cut fringes. Then drive up the paper against the area that is curved before you’ve got matched the curve and bend the fringes straight back.

Place the template together with the tile and t-Race the curve on the tile.

Cut grooves in the edge of the tile in toward the line, utilizing the tile noticed. All these are called reduction cuts.

Position the tile observed blade in the edge of the curve. Begin reducing, turning the tile somewhat as you-go. Cut gradually, so that you don’t unintentionally cut-away also much tile, spending near consideration to the line.

Nipping A-Way Deep Curves

Score then score perpendicular lines in the curve to the fringe of of the tile and along curves lines. Score mo-Re lines across these perpendicular lines. The mo Re lines you score, the more easy it’s going to be to nip the additional tile a-way.

Turn the device that is scoring around the nipper aspect, to another side, and hook the groove on the edge of the tile. Hold the tile above a trashcan or bucket to catch the particles.

Press down on the device to nip parts of tile a-way. Continue nipping before the tile that was excess was removed. The tile will split each rating line along.

See related